and the bottom shall be a cubit, and the breadth a cubit, and its border by its edge round about shall be the one span. And this shall be the higher part of the altar” (Ezekiel 43:13). The first section of this verse is referring to the outer altar: “The bottom shall be a cubit,” this is the base of the altar. “And the breadth a cubit,” this is the surrounding ledge of the altar. “And its border by its edge round about shall be the one span,” these are the protruding corners of the altar, which were one cubit wide and one cubit high. “And this shall be the higher part of the altar,” this is referring to the golden altar, which stood inside the Sanctuary and was also measured with small cubits.

Rabbi Yoḥanan explains that Rabbi Meir and Rabbi Yehuda disagree with regard to the inference from the phrase “And this shall be the higher part of the altar.” Rabbi Meir maintains that one can infer that it is this, the golden altar, which is measured with a cubit of five handbreadths, but all the cubits of the other vessels in the Temple are measured with a cubit of six handbreadths. And Rabbi Yehuda maintains that one can infer that like this small cubit shall be all the cubits of the other vessels in the Temple.

The Gemara discusses the interpretation of the verse: It might enter your mind to say that the verse is referring to the height of the sections of the altar, i.e., from the base of the altar until the surrounding ledge the height is measured with a cubit of five handbreadths. And what is the meaning of the phrase “The bottom shall be a cubit, and the breadth a cubit”? This is what the verse is saying: From the cubit at the bottom, i.e., the base of the altar, until the cubit of the breadth of the surrounding ledge shall be measured with a cubit of five handbreadths.

The Gemara explains the difficulty with this interpretation: According to this interpretation, how many cubits is the height of the altar? It is ten cubits. Six of these cubits, from the ground up to the surrounding ledge, are measured with a cubit of five handbreadths each, totaling thirty handbreadths. And the remaining four cubits, from the ledge up to the top of the corners of the altar, are measured with a cubit of six handbreadths each, totaling twenty-four handbreadths.

Accordingly, how many handbreadths is the height of the altar? It is fifty-four handbreadths. How many handbreadths is the height of half of the altar? It is twenty-seven handbreadths. How many handbreadths is the height from the top of the corners of the altar until the surrounding ledge? It is twenty-four handbreadths, four cubits of six handbreadths each. Therefore, how many handbreadths is the surrounding ledge short of half the height of the altar? It is three handbreadths above the halfway mark. And we learned in a mishna (Middot 3:1): A red line encircled the altar in the middle, in order to separate between the blood that must be presented on the upper part of the altar and the blood that must be presented on the lower part of the altar.

But this interpretation is contradicted by that which is taught in a baraita with regard to the bird burnt offering, the blood of which must be presented on the upper part of the altar: The priest would ascend the ramp and turn to the surrounding ledge and arrive at the southeast corner. He would pinch off the bird’s head across its nape, and separate it from its body. He would then squeeze out its blood on the wall of the altar beside him. And if the priest performed the squeezing below his feet, i.e., below the surrounding ledge, even one cubit beneath the ledge, it is valid.

The Gemara explains the difficulty: According to the previous calculation, the surrounding ledge was only three handbreadths above the halfway mark. Therefore, if one squeezes out the blood one cubit, of five handbreadths, below the ledge, isn’t he putting the blood of an offering that must be presented on the upper part of the altar, two handbreadths below the middle of the altar?

Rather, the verse must be interpreted differently. It is not referring to the height of the altar but to the width of each of its levels, as follows: “The bottom shall be a cubit”: From the top of the external side of the base of the altar, the wall of the altar is inset by one cubit of five handbreadths. “And the breadth a cubit,” this is referring to the width of the surrounding ledge of the altar, as at this point the wall is again inset by one cubit of five handbreadths. “Its border by its edge round about shall be the one span,” this is referring to the width of the corners of the altar, which is also a cubit of five handbreadths, causing the area of the top of the altar to be inset by an additional cubit.

The Gemara explains the halakha with regard to the bird burnt offering according to this interpretation: How many handbreadths is the height of the altar? It is sixty handbreadths, ten cubits of six handbreadths each. How many handbreadths is the height of half of the altar? It is thirty handbreadths. How many handbreadths is the height from the top of the corners of the altar until the surrounding ledge? It is twenty-four handbreadths, four cubits of six handbreadths each. Therefore, how many handbreadths is the surrounding ledge short of half the height of the altar? It is six handbreadths above the halfway mark. And we learned in the baraita: And if the priest performed the squeezing below his feet, even one cubit beneath the ledge, it is valid. According to this calculation, one cubit below the surrounding ledge is still part of the upper section of the altar.

The Gemara asks: To what part of the altar did you interpret the verse to be referring? It is referring to the width by which each section of the altar is inset. And can you interpret the verse as referring to the width by which each section is inset? But didn’t we learn in a mishna (Middot 3:1): The measurements of the base of the altar were thirty-two cubits by thirty-two cubits. Once the altar rose to the height of one cubit it was inset by one cubit on each side. This lower section was the base of the altar. One therefore finds that the second section of the altar measured thirty cubits by thirty cubits.

If the width of the base is measured with a cubit of five handbreadths, then the second section of the altar does not measure thirty cubits by thirty cubits. Since the rest of the altar is measured with a cubit of six handbreadths, the second section measures thirty cubits and two handbreadths.

And furthermore, the aforementioned mishna continues: Once the altar rose to the height of six cubits, i.e., five cubits above the base, it was inset by one cubit on each side, forming a ledge. This is the surrounding ledge. One therefore finds that the third section of the altar measured twenty-eight cubits by twenty-eight cubits. If the width of the base and the surrounding ledge are measured with a cubit of five handbreadths, the third section measures twenty-eight cubits and four handbreadths.

And if you would say that since the additional area is not a full cubit the mishna did not count it, this explanation is difficult, as the mishna continues: The area taken up by each of the four corners of the altar was one cubit on this side, along the length of the altar, and one cubit on that side, along the width of the altar. One therefore finds that the area of the top of the altar, within the corners, is twenty-six cubits by twenty-six cubits.

If the corners of the altar were also measured with a cubit of five handbreadths, then the top of the altar was a full cubit of six handbreadths wider, as the wall of the altar was inset three times on each side by a cubit of five handbreadths rather than six handbreadths. The area of the top of the altar was therefore twenty-seven cubits by twenty-seven cubits, which the mishna should not have referred to as twenty-six cubits. The Gemara answers that the tanna was not precise, as he should indeed have stated that the altar measured twenty-seven cubits by twenty-seven cubits.

The Gemara rejects this explanation, as the mishna continues: Within the corners of the altar there was an area where the priests set their feet as they circuited the altar. This area was one cubit on this side, along the length of the altar, and one cubit on that side, along the width of the altar. One therefore finds that an area of twenty-four cubits by twenty-four cubits remained as the area for the arrangement of wood on the altar. If the total area of the top of the altar was twenty-seven cubits by twenty-seven cubits, the remaining area would be twenty-five cubits by twenty-five cubits, not twenty-four by twenty-four.

And if you would say that here too, the tanna was not precise, that is difficult: But isn’t it written: “And the hearth shall be twelve cubits long by twelve wide, square on its four sides” (Ezekiel 43:16)? The hearth is the area for the arrangement of wood on the altar. One might have thought that the area for the arrangement of wood was only twelve cubits by twelve cubits. When the verse states: “On its four sides,” this teaches that one measures from the middle of the altar twelve cubits in each and every direction, i.e., the area for the arrangement of wood was twenty-four cubits by twenty-four cubits, not twenty-five by twenty-five.

The Gemara rejects an alternative explanation: And if you would say that when the mishna states that the base of the altar was thirty-two cubits by thirty-two cubits, with regard to six of those cubits the mishna initially counted them as cubits of five handbreadths, this explanation is difficult. If so, the base of the altar measures six handbreadths less, totaling only thirty-one cubits of six handbreadths, in which case the vacant area in the Temple courtyard would be one cubit wider than it actually was.

The Gemara elaborates: This is as we learned in a mishna (Middot 5:1): The dimensions of the entire Temple courtyard were a length of 187 cubits by a width of 135 cubits. The length of the courtyard from east to west was 187 cubits, divided as follows: The area of the Israelite courtyard, where it was permitted for Israelites to set their feet, was eleven cubits long, and the area where it was permitted only for the priests to set their feet was eleven cubits long. The altar was thirty-two cubits long. The area designated as: Between the Entrance Hall and the altar, was twenty-two cubits, and the Sanctuary was one hundred cubits long. There was an additional eleven cubits of space behind the Hall of the Ark Cover, i.e., behind the Holy of Holies, which was at the western end of the Sanctuary. If the altar was actually only thirty-one cubits long, the mishna accounts for the length of only 186 cubits.

Rather, the verse must be interpreted differently: “The bottom shall be a cubit,” this is referring to the height of the base. “The breadth a cubit,” this is referring to the width of the surrounding ledge, where the wall of the altar is inset by one cubit. “Its border by its edge round about shall be the one span,”